S&D Models
The home of Phoenix figures The home of Phoenix figures
 
1/24 & G Scale Products Scale Kit and Model Manufacturers 1/24 (G Scale)
Home Page
Contact Us
1/76 Products
1/43 Products
1/32 & 54mm Products
1/24 & G Scale Products
Authorised Retailers
Gallery
Exhibition Diary
Order Form
Mail Order Terms
Cat No. 1/24 AND G SCALE PRODUCTS Łeach Image
  G SCALE FIGURES    
GF1 British/European Driver 12.00 Image
GF2 US Engineer 12.00 Image
GF3 US Fireman 12.00 Image
GF4 US Conductor 12.00 Image
GF5 US Dispatcher/Agent 12.00 Image
GF6 US Brakeman 12.00 Image
  Bachmann G-Scale Rolling-Stock Detailing Sets    
GR1 Pewter detailing to suit the 'Bobber Caboose'. Set of 21 parts to replace most of the plastic grab-rails and end-platform rails. The set includes modified body-side curved rails, end platform railings with safety chains, brake stand with new wheel, revised roof rails and two dummy marker lights. The existing grab rails either side of the end doors and the ladders, are retained. Location of all the new fixing holes are detailed on the instruction leaflet and a 2.5mm drill is required for these and also to ream out some of the existing holes. 13.20 camera
GR2 Pewter detailing to suit the Wood Gondola. Set of 39 parts to replace the original plastic parts on both ends of the vehicle. The ends are not the same (as illustrated) and the set contains all grab-rails and step-irons, plus dummy coupler top blocks and operating rods for both ends and a complete brake stand and platform for one end. Location of all new holes required is shown on the instruction leaflet and a 2.5mm drill is required for these and also to ream out the existing holes. The Plain End illustration shows the sanded areas where existing holes have been filled. 15.60 camera
GR3 Pewter detailing to suit the 'Reefer'. 32-part kit to replace most of the original plastic parts on both ends of the 'Reefer'. Requires 1 piece of 2mm diameter brass rod 120mm long to complete (not supplied). 17.00 camera
GR4 Pewter detailing to suit 'Old Time' Wood Box Car. Set of 42 parts to replace the original plastic parts to give your boxcar a more authentic look. Including large and small grab handles, corner body steps, brake standard brackets and wheel hardware for the sliding doors. Apart from the door hardware, all are designed to fit into the existing locating holes (clean out with a 2.5mm drill). Requires 2mm x 120mm brass (brake) rod to complete (not supplied). 18.00 camera
GR5 Pewter detailing to suit 'Old Time' Coach or Combine. Set of 10 parts to replace both of the original plastic end-balcony rails, including left and right railings, brake-wheel and in addition, a gate and safety chain (plated brass). Posts fit into existing holes (clean out with a 2.5mm drill). 10.80 camera
  Bachman - Separate parts from Detailing Sets    
GP1 5 x Grab handles. Nominal length 20mm between pegs 2.50 camera
GP2 5 x Grab handles. Nominal length 25mm between pegs 2.50 camera
GP3 4 x Grab handles. Nominal length 34mm between pegs 2.00 camera
GP4 4 x Roof rails (corners). Nominal length 22mm x 22mm 3.00 camera
GP5 4 x Step irons 3.00 camera
GP6 2 x Brake Wheel. 20mm diameter 3.00 camera
GP7 2 x Brake wheel. 16.2mm diameter 3.00 camera
GP8 2 x Coupler top blocks (dummy) 3.00 camera
GP9 4 x Door hangers. 2 x Locking bars and 2 x Padlocks 3.00 camera
GP10 2 x Marker lights (dummy) 3.00 camera
GP11 Brakeman's platform - 3 piece kit to suit boxcar, reefer or stockcar 4.50 camera
GP12 Pair of Uncoupler bars & shackles to suit boxcar, reefer or stockcar 3.75 camera
GP13 Brake rod components kit. Complete set of castings to replace plastic brake rod on Bachmann 'Big Haulers' Reefer, Stock or Boxcar 5.25 camera
GP14 Bobber Caboose ladders kit. Complete set of castings and tube (for rungs) to replace plastic ladders on Bachmann Bobber Caboose 13.50 camera
  1/24 ACCESSORIES    
XA1 K pattern oil can 1.00 Image
XA2 Axe 1.20 Image
XA3 Sledge hammer (maul) 1.20 Image
XA4 Pick-axe 1.35 Image
XA5 Long handle sledge hammer (ball pein) 1.20 Image
XA6 Medium weight mining pick 1.35 Image
XA7 D-handle shovel, long blade with round shoulder 1.20 Image
XA8 Large ballast builders shovel 1.20 Image
XA9 Pair of double-ended spanners (2 sizes) 1.20 Image
XA10 Bucket with separate D-shaped handle 3.00 Image
XA11 Tin bath, complete one piece casting 4.00 Image
  1/24 BUILDING BAGS    
XB1 Pair of square finials with spear head profile top and ball base 1.50 Image
XB2 Pair of cosmetic, external ornamental hinges 1.50 Image
 
Product Index
1/76 Scale Products
1/43 Scale Products
1/32 Scale & 54mm Products
1/24 & G Scale Products
Ad Banner 2